energymeter.node
- Digitizes classic electricity, water, and gas meters together with a suitable sensor
- Ideal for meters without Wi-Fi or a power connection on site
- Operate up to 4 sensors simultaneously on one node
- Works exclusively in combination with an energieleser.bridge and at least one sensor
Delivery date: End of September
Select additional sensors for your Node
Pay in 30 days
Pay in 30 days
Radio-controlled meter
The energieleser.bridge allows you to read your wireless meters (wireless M-Bus) such as modern water meters. Please note that these radio signals are often encrypted and the corresponding key must be available. Once the meters are decrypted, they can be easily integrated.
Sensors (Reader Unit)
The sensors are attached to the respective meter and connected to the node. The sensors read the data directly from the meter, and the node sends it via radio signals (wireless M-Bus) to the bridge – completely without Wi-Fi.
Node (Sender unit)
The Node offers a solution for classic meters without radio, missing Wi-Fi reception, or power connection. It is a battery-powered interface and converts meter data into wireless M-Bus radio signals. It requires the appropriate sensors (reading unit) and the Bridge (receiving unit).
Wireless Smoke Detector
In addition to reading meter data, the energieleser.bridge also enables the reception and status of your wireless smoke detectors.
Bridge (Receiver Unit)
The energieleser.bridge acts as your central receiving unit: It captures the radio signals (wireless M-Bus) of compatible radio meters, as well as the energieleser.node, and transmits them to your network – directly to the energieleser app or locally to your Home Assistant system.
The Bridge is not installed at the meter, but wherever Wi-Fi is available – for example, directly in your apartment.
More reach, one system.
With the new energieleser.bridge and energieleser.node, we bring all your meter data into one system. With a focus on wireless M-Bus, we create a reliable connection to meters that are difficult to access.
Was ist der Unterschied zwischen Bridge und Node?
Die energieleser.bridge ist die zentrale Empfangseinheit des Systems. Sie empfängt Daten kompatibler (OMS-)Funkzähler per wireless M-Bus und überträgt diese per WLAN in die energieleser App oder Home Assistant. Die energieleser.node ergänzt das System für klassische Zähler ohne Funk. Sie wird direkt am Zähler installiert und mit den passenden Leseköpfen verbunden. Die Node sendet die ausgelesenen Daten anschließend per wireless M-Bus an die Bridge.
Funktioniert die Node allein?
Nein. Du benötigst passende Leseköpfe für deine Zähler, sowie die energieleser.bridge, welche die Daten empfängt.
Wie viele Leseköpfe kann die Node auslesen?
An eine energieleser.node können bis zu 4 Leseköpfe gleichzeitig angeschlossen werden – auch unterschiedliche Typen. Zum Beispiel: Strom + Gas + Wasser, oder andere Kombinationen. Ebenso können mehrere identische Leseköpfe parallel verwendet werden, beispielsweise mehrere Gas- oder Wasserleseköpfe gleichzeitig. Wichtig zu wissen: Ausschließlich beim stromleser.ttl können nur 2 Leseköpfe pro Node angeschlossen werden.
Your node is compatible with our sensors (3× electricity, 2× water, 2× gas). The compatibility of the sensors with your meter model is particularly crucial here. You can find more information about this on the respective sensor page.
You install the node with the appropriate sensors directly at the meter – up to 4 sensors simultaneously are possible. Compatibility with your meter model is required. The sensors are placed directly on the meter's interface and connected to the node via the cable. Depending on the local conditions, you power your node with the supplied batteries or the USB-C power adapter. The node translates the sensor data into wireless M-Bus signals and sends them to the bridge – so meter data without Wi-Fi easily ends up clearly displayed in your app.
Don't worry, we will provide you with detailed installation instructions when the products are finally shipped.
With the energieleser app, you have your data at a glance at all times. Download the app - connect the reading head - read out the data.
You might also like:
Funded by:
